Details on Name Pipe Runs
Information on the Name pipe runs dialog from pipe network calculation.
You are here:
Applies to: Heating, Cooling, Waste water.
The settings made in this dialog are saved in the project by clicking OK. Use the Save function to use the pipe run and storey name compilation in other projects.
First, have the pipe network calculated in order to be able to use all the functions of this dialog. In the waste water discipline, there is an additional category Rooms for further differentiation.
Pipe runs tab, Storeys tab
On both tabs you can enter free names for the pipe runs and storeys and assign it to the pipe runs. Multiple assignments are possible.
Selection window
If you have created a new name using the New function, the name can be selected here and then be assigned to one or more pipe sections.
Editing field
Enter a name for the storey or the pipe run. The editing field is only visible after clicking New or Edit.
New
Opens the editing field to enter a new name. Confirm the entry with Enter.
Edit
Opens the editing field to edit a name from the selection window. Confirm the modification with Enter.
Remove
Deletes the name marked in the selection window.
Load
Loads a previously saved compilation of pipe run and storey names.
Save
Saves a compilation of pipe run and storey names in an external file, so that it can be used in other projects.
Assign <
Assigns the marked name in the selection window to one or more pipe sections. Confirm the selection of the pipe sections in the model with Enter.
Inquire <
After clicking this button and selecting a pipe in the model, the pipe run and storey names of the corresponding pipe run are displayed in a dialog.