Details on Technical Data for Valves

Information about the technical data dialog for valves.

Depending on the program version, you can choose between neutral valves and manufacturer valves.

You are here:

Project tab ➤ Discipline ➤ Analyse tab ➤ Components ➤ Technical data ... ➤ Component

Dialog technical data Linear Revit

Name

Specifies the name of the component. You can modify the name. Clicking restores the default setting.

Settings

If you have previously defined the valve . as a specific manufacturer valve using the Classify ... command, the corresponding data will be displayed here. Subsequently, the valve will be dimensioned automatically by the program for the time being. Further, there is the option to select the shut-off valve manually.

Attention: If you have selected the fixed option for the nominal diameter here, but then change the nominal width in the Properties dialog of the program window, you must also adjust the value manually in this dialog using the drop-down list. The changed nominal diameter is otherwise not adopted and not taken into account in the calculation.

Neutral valve

You may set the kv-value or the Zeta value of the valve here. With respect to the Zeta value, there is the option to choose between automatic detection or manual setting.

Pressure loss characteristic

: Using this button you may print the appertaining characteristic curve diagram.