Details on Component Data for the Main Shut-off Valve
Information on the technical data dialog for the main shut-off valve.
The main shut-off valve represents the starting component for the pipe network calculation.
You are here:
Name
Specifies the name of the component. You can modify the name. Clicking 
restores the default setting.
Calculation
Inlet pressure: Set the available pressure for the entire gas pipe network at the main shut-off valve.
System name: If there are several systems within a drawing it makes sense to name each MSV in the field in order to easier identify them in the calculation dialog and in the printouts.
Nominal diameter: The nominal diameter results either from the calculated dimension of the pipe section (entry = Pipe section) or it can be preset (e.g. DN20).
Connections
The connection type can be selected from the drop-down list or is set by the program in the Standard entry.