Dimensioning a Room
Shows step by step how to dimensioning a room with a radiant heating and cooling system.
Before you begin
You would like to dimension a component (floor, ceiling, wall) of a room with a radiant heating and cooling system.
In the example, the general procedure is shown using a floor system. You can also carry out the procedure with ceiling or wall systems. If a floor system is in the system preselection, then the floor is created automatically as a room component. With ceiling and wall systems, you may still need to add the required room component (interior or exterior wall or ceiling or roof).
Requirement:
You have added the system to be layed out to the system preselection and adjusted it to the requirements of your project.
The work flow for designing radiant heating and cooling control systems with modules or panels is slightly different and is explained separately.
Navigate to:
Applies to: Radiant Heating, Radiant Cooling
Procedure
- Click in an empty line in the table. (Alternatively, you can also click
Dimension New Heating/Cooling Circuits in the symbol bar or press F5 in the table). The floor is created as a room component and the following menu opens:
- Select the type of zone that you want to design.
Results
The room is designed.
You can add room components, zones, blind areas and feed pipes at any time.