Details on Border Zone

Information on the Border Zone area.

The more precise specifications for the border zone to be added are defined in the Border Zone dialog when laying out with border zones.

You are here:

Module Overview ➤ Radiant Heating/Radiant Cooling ➤ Room Level ➤ New Heating/Cooling Circuits ➤ Border Zone

Dialog border zone Radiant Heating LINEAR Building

The area of the border zone can be entered directly in the Area field, calculated with entries in the Length and Depth fields or, if there is a CAD connection, retrieved from the CAD program with F9.

Execution Planning

Defines the type of the border zone. The desired hydraulic circuit of the border zone for typical cases can be defined. Post-editing on the manifold is often not required. The following design types are possible.

  • Simple border zone - connection to manifold

    The border zone is connected to the manifold as a separate circuit.

  • integrated border zone - in-line

    The border zone is connected in series with a occupied zone.

  • integrated border zone - parallel

    The border zone is connected parallel with a occupied zone (e.g. in the form of a snail).