Output Pipe Run Scheme

Shows step-by-step how to output a pipe run scheme.

Before you begin

You would like to output a pipe run scheme.

Requirement:

All components required for the pipe run scheme are available in the scheme (e.g. boiler or gas boiler in a heating pipe run scheme).

Navigate to:

Module overview ➤ Heating/Potable water/Waste water/Gas

Schematic heating Linear Smartplan

Procedure

  1. Click on Scheme Print Preview in the toolbar.

    The following context menu opens.

    Context menu heating Linear Smartplan
  2. Specify whether and with what information the sections of the scheme should be labeled.
    The dialog Scheme: (…) opens.
  3. Optional: Check the pipe run scheme of the calculated pipe network.
  4. Click on Printer Setup to define the default settings for the print output in the following dialog.
  5. Click Print.
    The dialog Print opens.
    Dialog Print Linear Smartplan
  6. If necessary, adjust the printer to be used under Name: and specify other desired settings for the subsequent print output.
  7. Click OK.

Results

The pipe run scheme was output with the desired options.