Jump directly to main navigation Jump directly to content

Details on Name Pipe Runs

Information on the Name pipe runs dialog from pipe network calculation.

You are here:

Project tabDisciplineAnalyse tabName Pipe Runs

Applies to: Heating, Cooling, Waste water.

Dialog Name pipe runs Linear Revit
Tip:

The settings made in this dialog are saved in the project by clicking OK. Use the Save function to use the pipe run and storey name compilation in other projects.

Note:

First, have the pipe network calculated in order to be able to use all the functions of this dialog. In the waste water discipline, there is an additional category Rooms for further differentiation.

Pipe runs tab, Storeys tab

On both tabs you can enter free names for the pipe runs and storeys and assign it to the pipe runs. Multiple assignments are possible.

Selection window

If you have created a new name using the New function, the name can be selected here and then be assigned to one or more section parts.

Editing field

Enter a name for the storey or the pipe run. The editing field is only visible after clicking New or Edit.

New

Opens the editing field to enter a new name. Confirm the entry with Enter.

Edit

Opens the editing field to edit a name from the selection window. Confirm the modification with Enter.

Remove

Deletes the name marked in the selection window.

Load

Loads a previously saved compilation of pipe run and storey names.

Save

Saves a compilation of pipe run and storey names in an external file, so that it can be used in other projects.

Assign <

Assigns the marked name in the selection window to one or more section parts. Confirm the selection of the section parts in the model with Enter.

Inquire <

After clicking this button and selecting a pipe in the model, the pipe run and storey names of the corresponding pipe run are displayed in a dialog.