Jump directly to main navigation Jump directly to content

Details on Component Data for Heater

Information about the technical data dialog for heater.

The heater is used to heat incoming outdoor air. As the temperature changes, so does the density of the air and thus the volume to be carried.

You are here:

Project tabDisciplineAnalyse tabComponentsTechnical data ...Component

Dialog technical data Linear Revit

Name

Specifies the name of the component. You can modify the name. Clicking restores the default setting.

Duct component, Pressure loss calculation, Sound level, Geometry

Information on these sections of the component data can be found on the page “Details on duct component, pressure loss calculation, sound level, duct material/insulation and geometry in the components”.

Performance data

The heating capacity is determined after entering the outlet temperature with the volume flow rate. At the same time, the change of volume flow rate at the heater outlet is calculated.