Detecting Building
Shows step-by-step how to prepare your model in order to detect it and how to have it detected by LINEAR Building.
Before you begin
You want to prepare your model and detect it with LINEAR Building.
Requirements:
You have configured the synchronization settings in the dialog Configuration in LINEAR Building to your needs.
Navigate to:
Procedure
- Open the Building detection section.
- Select an option for ground approximation.
- Select the reference level of the ground level.
This option only applies if you have selected constant ground level for ground approximation.
- Optional: Under Diagnosis, activate the option Save component information if LINEAR Building shall display component segments instead of complete components in the Revit model.
- Click Building detection....
LINEAR Building opens.
- Click on LINEAR Building to Start with you CAD model.
The Select template dialog opens.
- Select a template.
The template files contain country-specific data such as locations, temperatures, variables and room templates.
LINEAR Building analyzes the building structure. The dialog Building data opens.
- Enter all project data and confirm your entry with OK.
Results
The building has been detected and is available for further analysis.
