Configuring Storey Options
Shows step-by-step how to configure the options for a storey in your scheme.
Before you begin
You would like to configure the storey options of a storey in a scheme.
Requirement:
Your project contains at least one storey.
Navigate to:
Applies to Heating, Potable water, Waste water and Gas.
Procedure
- Click a pipe run button of a storey (
, 
). The following context menu opens.
- Select the menu item Storey options.... The Storey options dialog opens.
- Enter the height of the floor construction of the storey and, if necessary, the suspended ceiling.
- If necessary, adjust the pipe routing of the current pipe run.
- Optional: Click Transfer to transfer the selected pipe routing to other pipe runs and/or storeys. In the context menu that appears, select whereon you would like to transfer the pipe routing.
- Specify whether the ascending pipe run of the storey is to be provided with a pipe partitioning of fire resistance class R-90 in the case of wall or ceiling lead-throughs.
- Optional: Click Transfer to transfer the selected R-90 pipe partitioning to other pipe runs and/or storeys. In the context menu that appears, select whereon you would like to transfer the pipe partitioning.
- Close the dialog with OK.
Results
The storey options are set.