Jump directly to main navigation Jump directly to content

Details on Component Data for Air Cooler

Information about the technical data dialog for air cooler.

The air cooler cools the air being carried into the room (recirculation air or outside air). As the temperature changes, so does the density of the air, and thus the volume to be carried.

You are here:

Project TabDiscipline VentilationPlanning TypeAnalyse TabComponentsTechnical Data… Component Selection

Dialog technical data Linear Revit

Name

In this field you can enter an individual name for the component. Clicking on restores the original name and overwrites the previous entry.

Duct component, Pressure loss calculation, Sound level, Geometry

Information on these sections of the component data can be found on the page “Details on duct component, pressure loss calculation, sound level, duct material/insulation and geometry in the components”.

Performance data

The cooling capacity is determined after entering the outlet temperature with the volume flow rate. At the same time, the change of volume flow rate at the cooler outlet is calculated.