Jump directly to main navigation Jump directly to content

Configure Ventilation at Room Level

Shows step-by-step how to set the ventilation system at the room level.

Before you begin

You would like to configure the ventilation at room level.

Navigate to:

Module overviewHeat loadRoom levelHeat loadVentilation

Procedure

  1. Enter the Spec. Minimum volume flow rate.
  2. If the ventilation system in this room should differ from the globally set one, select a Ventilation System.
  3. Enter the Air Exchange Rate or the air flow rates of the ventilation system.

Results

The Ventilation for this room is configured.