LINEAR Solutions 25 for AutoCAD

Details on General Ventilation Zone Data

Information on the General Ventilation Zone Data section of the Heat Load module at ventilation zone level.

Note: If you have used the function Consider apartments with the same name and number as one apartment to connect two apartments, all settings in this area will be transferred to the respective connected apartment.

You are here:

Module Overview ➤ Heat Load ➤ Ventilation Zone Level ➤ General Ventilation Zone Data

Heat load building Linear Building

Ventilation System

Ventilation System:

Here you can set a ventilation system for the ventilation zone in deviation from the project settings. The setting from the project level is adopted for now.

Design Pressure Difference of the OuAO: The design pressure difference is transferred from the Ventilation module if the module is activated and a value is available for this parameter.

η Value (Heat Recovery):

Enter the efficiency of the heat recovery system in percent. It is only used if a supply and extract air system is available. The efficiency is then used to calculate the supply air temperature of supply air rooms.