Details on the Symbol Bar in Connection with the Panel Heating/Cooling

Information on the symbol bar for the panel heating/cooling calculation.

You are here

Toolbar

Table 1. System Preselection Section
Button Description
Component in Master Tables

Opens the U-value calculation of system components in the master tables.
Optimize

Executes an optimization of the dimensioning. This is useful if parameters of the dimensioning have been changed and a complete redimensioning is not desired.

Note:

An exception is the optimization of the number of circuits: It corresponds to a redimensioning of the panel system in the room.

The following variants are available for selection:

  • Differential Temperature Optimizing (DT)

    Optimizes the dimensioning by adjusting the differential temperature.

    The laying spacing and the defined circuits remain unchanged.

  • Laying Spacing Optimising (LS + DT)

    Optimizes the dimensioning by adjusting the laying spacing and differential temperature.

    The defined circuits remain unchanged.

  • Circuit Quantity Optimizing (CQ + LS + DT)Laying Spacing Optimising (LS + DT)

    Optimizes the dimensioning by adapting all parts of the active situation.

    All individual specifications are replaced if possible.
Create Labels

Opens the program liNEtikett, which allows you to create and print labels for the inscription of manifolds and manifolds outlets. The prerequisite for this is that the dimensioning of the panel system has already been executed.
Additional Material

Opens a catalog for additional material selection of the manufacturer. Additional materials from manufacturers whose systems are in the preselection are shown.
Import Web Layout

: Enables the import of projects from online quick dimensioning in WEBPRO format. After the import the project can be edited further.
Table 2. Symbol Bar of the Room View (Panel Heating/Panel Cooling)

Button

Description

Pipe Run View

Switches to the Pipe Run View of a circuit marked in the room table.

Optimize

Executes an optimization of the dimensioning. This is useful if parameters of the dimensioning have been changed and a complete redimensioning is not desired.

Note:

An exception is the optimization of the number of circuits: It corresponds to a redimensioning of the panel system in the room.

The following variants are available.

Draw Heating/Cooling Circuits

If a CAD connection exists, the program switches to the CAD program in order to draw heating or cooling circuits.

Draw Manifold in CAD

If a CAD connection exists, the program switches to the CAD program to draw manifolds there.

Connect Heating/Cooling Circuits

Note:

This function is only available in combination with AutoCAD.

Draw Expansion Joint

Note:

This function is only available in combination with AutoCAD.

Percentage of Area

Opens the dialog to define the percentage of areas (dry systems) or the dialog to define the single panels or modules (module panel systems). This function is activated if a module system has been installed and the room component (floor, ceiling or wall) occupied by the module is marked in the table.

Detect Transition Material

Opens the Transition Material dialog, where you enter parameters for the installation of heating or cooling zones manually via expansion joints or can have them determined from the CAD program. The button is activated if you selected a room component (floor, ceiling or wall) in the room and if transition material is stored in the selected radiant heating and cooling system.

Dimension New Heating/Cooling Circuits

Opens the context menu for dimensioning new circuits, border zones, feed pipes, defining blind areas and adding new room components. As an alternative to clicking the button, you can also press F5 in a table line or click in an empty line.

Heating/Cooling Circuit from CAD

If a CAD connection exists, the program switches to the CAD program in order to transfer heating or cooling circuits that have already been drawn in with their parameters to the room table of LINEAR Building.

In the CAD program, you can select circles for transfer by clicking in the single selection mode or use the series selection mode. With series selection, the circles are selected by drawing a section line that intersects the circles to be adopted.

Note:

This function is only available in combination with AutoCAD.
Table 3. Symbol Bar of the Quick Dimensioning (Panel Heating/Cooling)

Button

Description

Redimensioning

Dimensions all rooms marked in the table in just one step.

Optimize

Note:

An exception is the optimization of the number of circuits: It corresponds to a redimensioning of the panel system in the room.

The following variants are available.