Jump directly to main navigation Jump directly to content

Details on the Toolbar in Connection with the Design of Radiators and Cooling Convectors

Information on the context-dependent functions of the toolbar in the modules for designing radiators and cooling convectors.

You are here

Toolbar

Button Description
Switches to the 3D/Floor Plan Mode

In connection with AutoCAD, this mode decides whether a 2D element or a cuboid with the set VDI detailing is drawn in when a radiator is drawn in. Drawn radiators are colored differently depending on the mode in order to visually detect which elements were placed in which mode in the connected CAD program.

Pipe Run View

Shows the selected element in the associated pipe run.

U-value Exchange

Opens the Switch U-Value dialog, in which you can replace U-values within the respective current structural level and within the module.

Dimensioning

Opens a context menu in which you can assign loads to all rooms at the current structure level or reassign all existing loads at the structure level.

Reassign Radiators/Cooling Convectors from CAD

If LINEAR Building loses the connection to the elements in AutoCAD after drawing in radiators or cooling convectors, e.g. due to a crash, drawn elements can be linked again storey by storey using this function.

Insert New Radiator/Cooling Convector

Inserts a new radiator or cooling convector at room level. When dimensioning the new radiator/cooling convector, any existing radiators or cooling convectors are taken into account and re-dimensioned if necessary.

Room View

Switches to the room view of the room whose circular zone, radiator/chilled beam or diffuser is selected in a table, the building structure or the pipe run view.