Jump directly to main navigation Jump directly to content

Details on Configuration - CAD-General

Information about the CAD-General section in the Configuration of LINEAR Building.

You are here:

Configuration (Toolbar)CAD General

CAD General area in the configuration of LINEAR Building

Drawing Parameters

Labeling Scale/Unit

Specifying the scale and unit in which the CAD drawing used was created is a crucial factor for measuring off dimensions (lengths and areas) and drawing in elements such as radiators and cooling convectors or heating and cooling circuits. Therefore, when starting a new project, and when opening an existing project, make sure that the specifications in the drawing and in the configuration match.

Note:

This function is only available in combination with AutoCAD.

Execute Labeling in Active View Plane

Enabled: Allows the labeling of radiators, rooms, etc. in any perspective, e.g. an isometric perspective, without distorting the labels inserted in the current view plane.

Disabled: The labeling is inserted on the XY storey of the current height.

Note:

This function is only available in combination with AutoCAD.

Automatic Labeling in the Background

Enabled: Any modification of consumer data is transferred directly to the drawing if a CAD connection is established.

Disabled: Modifications of consumer data are transferred to the drawing only by using the Update button .

Note:

This function is only available in combination with AutoCAD.