Details on Gas-Meter (Assistant)
Information about the Gas-meter dialog in the assistant.
You are here:
One-pipe meter / Two-pipe meter
Specifies whether the gas meter is a single-pipe or a two-pipe meter.
Nominal load in m³/h
Use the drop-down list to select nominal load for the gas meter.
Estimated gas meter dimensioning 
If you click the calculator symbol, you will get to the dialog Estimated gas meter dimensioning. In this dialog, you can roughly calculate the nominal load by specifying consumers for the gas network.
With increased thermal capacity / with manifold / with outlet shut-off ball valve / Right side construction: Select these additional options to create the gas meter.
Drop-down list TSD/GEFV: Set here whether the meter should have a TSD or a GEFV or not.
Drop-down list file type: Select whether the meter should have a Corner type or a Straight way type.
Draw <: After clicking Draw < you can place the gas meter in the drawing according to the default settings. The Gas meter then hangs at the mouse pointer to select a position in the drawing.