About the Partial Network Start
Explains the concept of the partial network start in relation to its technical data dialog.
A partial network start can be used as a starting component for the pipe network the same way a cooling or a heat generator can.
If you intend to use a pipe run inlet as a start component for a partial network, you have to connect it explicitly to a partial network end. The link is created via the component dialog of the partial network end.
If the system temperature is changed, the program will ask you if the capacities and/or mass flow rates should not be changed or should be recalculated based on the temperatures.
When changing the system temperature, the radiators are not changed in their dimensions. They have to be redimensioned based on the changed differential temperature.