Spring direct naar de hoofdnavigatie Spring direct naar inhoud

Details on Component Data for the Main Shut-off Valve

Information on the technical data dialog for the main shut-off valve.

The main shut-off valve represents the starting component for the pipe network calculation.

You are here:

Project TabDisciplineAnalyse TabComponentsTechnical Data ...Component

Technical Data Main Shut-Off LINEAR Revit

Name

In this field you can enter an individual name for the component. Clicking on restores the original name and overwrites the previous entry.

System Name

Defines the systems name that is used in the print out.

Calculation

Inlet Pressure: Set the available pressure for the entire gas pipe network at the main shut-off valve.

System Name: If there are several systems within a drawing it makes sense to name each MSV in the field in order to easier identify them in the calculation dialog and in the printouts.

Nominal Diameter: The nominal diameter results either from the calculated dimension of the pipe section (entry = Pipe/Duct Section) or it can be preset (e.g. DN20).

Connections

The connection type can be selected from the drop-down list or is set by the program in the Standard entry.