Spring direct naar de hoofdnavigatie Spring direct naar inhoud

About Duct Components

Explains the concept of duct components in the Air Duct Network Calculation.

In the Duct Components dialog, select the component models to be used for the components in the Air Duct Network Calculation. Data from different manufacturers are available for this purpose, as well as the models from the dialog Curve Data created by the user. Assignment of valve data is done using a global preselection or by explicitly assigning valve data to individual components in the drawing.

Valves added to the preselection (Duct Components dialog) are saved in the project including their technical data until they are removed from the preselection. Once a model is removed from preselection, it is no longer used for the corresponding duct components in the calculation.

Install an appropriate data set to use the data from manufacturer duct components. Manufacturer data sets can be downloaded via the LINEAR Installation Center.

If several models have been selected for a calculation type and possibly for a class under Global Preselection, the program calculates which model fits best and inserts it automatically. If several model series are to be taken into account for the corresponding duct component, you can define a priority for the assignment during the calculation in the Duct Components dialog. Under Local Assignment you may select and assign models that deviate from those selected in global preselection. This tab also lists the models of components that have been placed from the LINEAR CAD Browser.

Duct Components in the Air Duct Network Calculation

Hydraulic balancing is part of the calculation of the duct network. This is achieved through the dimensioning and adjustment of regulating components such as air vents or volume flow controllers, so that the pressure loss is identical in all flow paths when viewed from the fan at set volume flows. The pressure loss data for all installed duct components is taken from the curve data of the assigned component models.