Knowledge Base Revit
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Heat Load
Select a calculation method for the calculation of the heat load according to the location and requirements of your project.
Heat Load Calculation according to SN SIA 384/2(2020)
Explains the concept of heat load calculation based on SN SIA 384/2:2020.
About General Heat Load Data
Explains the concept of general heat load data in the context of heat load calculations.
Details on Ventilation
Information on the Ventilation section of the general heat load data.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function, and interaction of the LINEAR Solutions programs in Revit and LINEAR Building.
Preparing Building
Learn how architects prepare plans and models to create a building model for building analysis.
Pre-conception design
Learn how to plan the positionining and dimensioning of technical control centers and create the route concept in collaboration with all parties involved in the planning.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
- About Building Detection
  Explains the concept of building detection in LINEAR Building from a connected CAD program.
- Heat Load
  Select a calculation method for the calculation of the heat load according to the location and requirements of your project.
  - Heat Load Calculation Based on EN 12831-1 (2017)
    Explains the concept of heat load calculation based on EN 12831-1 (2017).
  - Heat Load Calculation Based on EN 12831 (2003)
    Explains the concept of heat load calculation based on EN 12831 (2003).
  - Heat load calculation according to ISSO 51 and 53 (2018)
    Explains the concept of heat load calculation according to the Dutch standards ISSO 51 and ISSO 53 (2018).
  - Heat Load Calculation according to SN SIA 384/2(2020)
    Explains the concept of heat load calculation based on SN SIA 384/2:2020.
    - About Building Detection
      Explains the concept of building detection in LINEAR Building from a connected CAD program.
    - About General Heat Load Data
      Explains the concept of general heat load data in the context of heat load calculations.
      - Selecting a Calculation Method
        Shows step-by-step how to select a calculation method for your heat load.
      - Details on Location and Climate Data
        Information about the Location and climate data section of the general heat load data.
      - Details on Locations
        Information about the Locations dialog in the general heat load data.
      - About Location and Climate Data sets
        Explains the concept of location and climate data sets in .
      - Details on Temperatures to Unheated Rooms
        Information on the Temperatures to unheated rooms section in the general heat load data.
      - Details on Building Mass
        Information about the Building mass section in the general heat load data.
      - Configuring the Heat Transfer System Globally and at Room Level
        Shows step-by-step how to set up a heat transfer system for rooms higher than 4 m, both project wide and room specific.
      - Details on Heat Transfer System
        Information about the Heat transfer system section in the general heat load data.
      - Details on Additional Capacity
        Information on the Additional capacity section of the general heat load data.
      - About Thermal Bridge Supplements
        Explains the concept of thermal bridge supplement in the heating load calculation according to the calculation method Switzerland: SN SIA 384/2 (2020).
      - Set Ventilation System Globally
        Shows step-by-step how to set up a ventilation system for your entire project.
      - Details on Ventilation
        Information on the Ventilation section of the general heat load data.
    - About Component Values
      Explains the concept of component values.
    - About the Transmission
      Explains the concept of transmission at room level, in relation to the heat load calculation.
    - About Ventilation Data in the Swiss Heat Load
      Explains the concept of thermal bridge supplement in the heat load calculation according to the calculation method Switzerland: SN SIA 384/2(2020).
  - Heat load calculation according to DS 418(2020)
    Explains the concept of heat load calculation according to the danish standard DS 418.
  - Heat load calculation according to SP 60.13330.2016
    Explains the concept of heat load calculation based on SP 60.13330.2016.
  - Approximate Heat Load
    Explains the concept of approximate heat load calculation by means of quick entry.
- Cooling Load Short Procedure
  Learn how to calculate a cooling load for your building based on the short procedure of VDI 2078 (1996), section 6.
- Cooling Load, dynamic
  Select a method for determining the cooling load to suit the location and requirements of your project.
- Ventilation
  Explains the concept of determining air volumes for residential and non-residential buildings.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to insert components from the LINEAR CAD Browser, from the libraries and configurators of the Library tab or from LINEAR Building into a model.
Constructing Networks
Learn how to create pipe and duct networks, design slots and openings and manage discipline-related reports and tasks.
Calculating Networks
Learn how to calculate pipe and duct networks.
Creating a Scheme
Get information on the workflow Scheme for the disciplines Potable Water and Heating in Revit.
Construction Design
Get information about the workflow Construction design in connection cable trays as well as pipe and duct networks.
Labeling
Learn how to label pipe/duct sections and components in the model.
Output
Obtain information on the output of calculation results and material extracts in your CAD program in LINEAR Building. In addition, find out how you can customize the layout of the output documents using the print mask editor.
Troubleshooting
Get information about possible sources of errors when working with LINEAR Solutions.

Details on Ventilation

Information on the Ventilation section of the general heat load data.

You are here:

Module overview ➤ Heat load ➤ Project level ➤ General heat load data

Newly built house

Activated: for the minimum air exchange, different values are used from the standard for new buildings as for old buildings.

Drop-down list: Selection of the ventilation system

Select the type of ventilation system as the default setting for the project. In combination with the room type, a standard-based minimum air exchange rate is determined at room level.

Eta value (heat recovery)

Enter the efficiency of the heat recovery system in percent. It is used only when a supply and exhaust air system is selected. The efficiency is then used to calculate the supply air temperature of supply air rooms. In the Ventilation area, you can specify for each room whether it is a supply air room.

Name	Purpose	Lifetime	Type	Provider
CookieConsent	Saves your consent to using cookies.	1 year	HTML	Website
fe_typo_user	Assigns your browser to a session on the server.	session	HTTP	Website

Name	Purpose	Lifetime	Type	Provider
_ga	Used to distinguish users.	2 years	HTML	Google
_gat	Used to throttle request rate.	1 day	HTML	Google
_gid	Used to distinguish users.	1 day	HTML	Google
_ga_QTGLMF6700	Google Analytics cookie to throttle the request rate.	2 years	HTML	Google
_gcl_au	Used by Google AdSense to experiment with advertisement efficiency.	3 months	HTML	Google
_clck	Persists the Clarity User ID and preferences, unique to that site, on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 years	HTML	Microsoft
_clsk	Connects multiple page views by a user into a single Clarity session recording.	366 day	HTML	Microsoft
_uetsid	This is a tracking cookie used by Microsoft Bing Ads. It allows us to target a user who has visited our website before.	1 day	HTML	Microsoft
_uetvid	Used to track visitors across multiple websites to present relevant advertising based on the visitor's preferences.	390 day	HTML	Microsoft
ln_or	Registers statistical data on users’ behaviour on the website. Used for internal anyalyzes by the website operator.	1 day	HTML	LinkedIn

LINEAIR VOOR AUTODESK REVIT

LINEAIR VOOR AUTODESK AUTOCAD

Details on Ventilation

Newly built house

Drop-down list: Selection of the ventilation system

Eta value (heat recovery)