Details on the Toolbar in Connection with the Design of Radiators and Cooling Convectors
Information on the context-dependent functions of the toolbar in the modules for designing radiators and cooling convectors.
You are here


Button | Description |
---|---|
![]() | In connection with AutoCAD, this mode decides whether a 2D element or a cuboid with the set VDI detailing is drawn in when a radiator is drawn in. Drawn radiators are colored differently depending on the mode in order to visually detect which elements were placed in which mode in the connected CAD program. |
![]() | Shows the selected element in the associated pipe run. |
![]() | Opens the Switch U-Value dialog, in which you can replace U-values within the respective current structural level and within the module. |
![]() | Opens a context menu in which you can assign loads to all rooms at the current structure level or reassign all existing loads at the structure level. |
![]() | If LINEAR Building loses the connection to the elements in AutoCAD after drawing in radiators or cooling convectors, e.g. due to a crash, drawn elements can be linked again storey by storey using this function. |
![]() | Inserts a new radiator or cooling convector at room level. When dimensioning the new radiator/cooling convector, any existing radiators or cooling convectors are taken into account and re-dimensioned if necessary. |
![]() | Switches to the room view of the room whose circular zone, radiator/chilled beam or diffuser is selected in a table, the building structure or the pipe run view. |