Print Material Compilation
Shows step-by-step how to print material compilations.
Before you begin
You want to print a material compilation.
Requirement:
In your project, you have at least one room with radiators, cooling convectors, panel heating/cooling system or domestic ventilation systems.
Navigate to:
Procedure
- Optional: Activate Take minimum packing volumes into account.
- In the tree structure, select the level whose material compilation you want to print. Tip: If you would like to add further material to a level from the Building Structure (e.g. a room), switch to the Building Structure, select the desired level and switch to the Material Composition tab.
Click on an empty row in the material table to open the list of installed manufacturer data sets, which you can use to open the item selection dialog.
- Click on Print
in the toolbar. The dialog Print Preview of the Calculation Results opens.
- Activate the checkboxes of the desired connections.
- If you wish, change the Number of the First Page and the Print Language.
- Click OK.
A preview of the printout opens.
- Check the contents of the preview and click on Print. The dialog for selecting the desired content opens again.
- Adjust your selection accordingly and click OK.
The dialog Print opens.
- If necessary, adjust the settings in the dialog and click OK. The material composition will be printed according to your settings.
Results
You have printed out a material composition.