Details on Pipe Run Settings

Information about the Pipe run settings dialog in gas pipe network calculation.

The pipe run names will be displayed in all dialogs and in the printouts. The Material protection selection under passive protection influences the material output of the pipes in the material list.

You are here:

Project tab ➤ Gas discipline ➤ Analyse tab ➤ Pipe Runs

Pipe run settings Linear Revit

Passive protection

Enabled: You can select a passive protection and assign it to the section parts.

Disabled: The passive protection is not used during assignment.

Pipe run name

Enabled: You can enter a pipe run name and assign it to the section parts.

Disabled: The pipe run name is not used during assignment.

Assign <

After clicking this button, select the section parts that are to receive the selected passive protection or pipe run name.

Show data: Name, Passive protection, Pipe materials

Select the properties that are to be displayed in color in the model when using the Show < function.

Tag: Displays a previously assigned pipe run name.

Passive protection: Displays a previously assigned passive protection.

Pipe materials: Displays the pipe systems, that have been assigned using the Pipe tables or the Pipe material ... < function in the Components section.

Show <

Displays the previously assigned pipe run names, passive protection or material systems in color in the model.