Search and Replace Component Data

Shows step-by-step, how to search and replace component data.

Before you begin

You would like to modify certain component data, such as the orientation of components or the U-values of certain components in your project.

Navigate to:

Note:

When filtering, available properties in the currently activated module and on the currently selected structure level are offered.

Building structure ➤ Structural level ➤ Symbol bar

General heat load data Linear Building

Procedure

  1. Click .

    The dialog Search & Replace opens.

    Dialog search replace Linear Building
  2. Select a category from the drop-down list above the table.
  3. Click in the Search area in the table and select a Filter.
  4. Select an Operator.
  5. Select by clicking a Value.
  6. If necessary, click in the next line and select in the &/+ column whether you would like to link the second filter with AND or OR.

    You can create as many filters as you like. With F6 you can delete lines, with F5 you can insert new lines above the currently selected line.

    Dialog search replace Linear Building
  7. Under Replace, select the component data type you would like to replace from the drop-down list.
  8. Select after clicking the new value or enter the value manually.
  9. In the list of filtered components in the X column, deactivate all components that should not be included in the replacement process.
  10. Click Replace values.

Results

The operation is confirmed with Number of modified components and the data of the components are adjusted.

Dialog notification Linear Building