Jump directly to main navigation Jump directly to content

Details on tab LINEAR| Tools

Information on the tab LINEAR| Tools on the Revit Ribbon.

You are here:

Revit RibbonTab LINEAR| Tools

Productivity

Button

Function

Collision check

Opens the dialog Collision check, which allows you to parameterize and execute collision checks.

Model diagnosis

Opens the Model diagnosis dialog, in which you can search specifically for errors, problems and possibilities for optimization in your model.

Void Manager

Opens the LINEAR Void Manager, which enables the communication of void proposals from the Void planning workflow and thus ensures almost seamless collaboration between the various project participants.

Project participants who do not have a LINEAR license can download the LINEAR Void Manager free of charge from the download page https://www.linear.eu/de/software/loesungen-fuer-autodesk-revit/linear-void-manager/and then install it. After installation, the Revit Void Manager is available on the Additional modules tab of the LINEAR Ribbon.

Transfer view properties

Opens the dialog Transfer view properties, which allows you to transfer the settings of the current view to other views of the same type.

Batch conversion

Opens the dialog Batch conversion, which allows you to convert Revit- families of an older version to the current version.

LoG assistant

This function is only available in the family editor. Opens the Create subcategories for LoG dialog, where you can generate interference spaces and create other subcategories for control of element visibility.

Quick access

Button

Function

Horizontal working section

Activates the function that allows you to create a horizontal working section in a separate section view.

Vertical working section

Activates the function that allows you to create a vertical working section in a separate section view.

Working Section in front of wall

Activates the function that allows you to create a working section in front of a wall. The working section is opened in a separate section view.

3D-Selection box

Activates the function that allows you to highlight selected elements in a 3D view in order to view a spatial situation more closely and to design it.

Remove 3D-selection box

Activates the function that allows you to remove a 3D selection frame.

Turn components by 90 degrees

Activates the function that allows you to turn components by 90 degrees.

The command rotates a component 90 degrees on the Z axis. Pipe or duct accessories with precisely two opposite connections are rotated on the described axis. In cases of pipe or duct accessories with more than 2 connections, an attempt is made to derive the axis of rotation from the associated connections.