Details on Configuration - Cooling Load Short Procedure
Information about Cooling load short procedure section in the Configuration for LINEAR Building.
You are here:
Free cooling load zone
If no climate data is stored for the location for which you would like to calculate the cooling load, you can freely enter values for outside air temperature, solar radiation and sun position.
Outside air temperature (°C): Opens the Daily cycle of outside temperature dialog, where you can enter the averaged daily cycle of outside temperatures for the two calculation months July and September from 1 - 24h.
Solar radiation.: Opens the Direct and diffuse radiation dialog, in which you can enter direct and diffuse radiation for the two calculation months July and September, depending on the orientation.
Sun position...: Opens the Azimuth and elevation angle dialog, where you can enter the Azimuth and elevation angle in degrees for the two calculation months July and September
Supplementary data
Heat transmission resistances: Opens the Heat transmission resistancesdialog, where you can adjust heat transmission resistances for internal or external components, taking into account the direction of heat flow.