Configuring Different IP Circles (Server/Client)
Shows step-by-step what settings you need to make in the Admin Control Center (ACC) if your license server and clients are in different IP circuits.
Before you begin
Since your server and clients are in different IP circles, the dongle will not be found by the clients. You would now like to store the IP address of the server so that the dongle is found by the clients.
Requirement:
All the points mentioned on the Prerequisites for installing software protection page are taken into account.
Navigate to:
Tip:
You can also connect to the ACC directly through your web browser. Open the page http://localhost:1947 for this purpose.
Procedure
- Start LINEAR Admin on the clients.
- On the Hasp Tools tab, click Control Center to connect to the ACC.
- Click the Configuration option in the Navigation bar and go to the Access to Remote License Managers tab.
- Uncheck the Broadcast Search for Remote Licenses option and enter the IP address of your server under Remote License Search Parameters.
- Click Submit to apply the settings.
Results
The IP address of the dongle server is stored in the ACCs of the clients and the dongle can now be found by the clients.