Knowledge Base AutoCAD
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Ventilation
Explains the concept of determining air volumes for residential and non-residential buildings.
About Air Volume Calculation for Residential and Non-Residential Buildings
Explains the concept of determining air volumes for residential buildings and for rooms in non-residential buildings.
About the Calculation Method “DIN EN 16798-1 Air Pollution, Procedure 1”
Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method DIN EN 16798-1 Air Pollution, Procedure 1.
Details on “Air Pollution Proc. 1” (Room Level)
Information on the Air Pollution Method 1 section of the Ventilation module in LINEAR Building.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function and interaction of the LINEAR Solutions programs in AutoCAD and LINEAR Building.
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
- About Building Detection
  Explains the concept of building detection in LINEAR Building from a connected CAD program.
- Heat Load
  Select a calculation method for the calculation of the heat load according to the location and requirements of your project.
- Cooling Load Short Procedure
  Learn how to calculate a cooling load for your building based on the short procedure of VDI 2078 (1996), section 6.
- Cooling Load, dynamic
  Select a method for determining the cooling load to suit the location and requirements of your project.
- Ventilation
  Explains the concept of determining air volumes for residential and non-residential buildings.
  - Exclude Structural Levels from the Air Volume Calculation
    Shows step-by-step how to deactivate levels of the building structure for the air volume determination and, if necessary, for the creation of a ventilation concept for residential buildings.
  - Define the Calculation Method for Determining the Air Volume
    Shows step-by-step how to define the calculation procedure for determining the required air volumes in LINEAR Building.
  - About Air Volume Calculation for Residential and Non-Residential Buildings
    Explains the concept of determining air volumes for residential buildings and for rooms in non-residential buildings.
    - About the Number of Persons in the Room
      Explains the concept of the number of persons in the room in the context of the Ventilation module.
    - About the “DIN 1946-6 Domestic Ventilation” Calculation Method
      Explains the concept of determining the required air volumes for domestic ventilation and the creation of ventilation concepts based on the DIN 1946-6 Domestic Ventilation calculation method.
    - About the Calculation Method “DIN 18032-1 Gymnasiums”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method DIN 18032-1 Gymnasiums.
    - About the Calculation Method “VDI 2082 Sales Premises”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method VDI 2082-7 Laboratories.
    - About the Calculation Method “Workplace Guidelines”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method Workplace Guidelines.
    - About the Calculation Method “DIN EN 16798-1 Air Pollution, Procedure 1”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method DIN EN 16798-1 Air Pollution, Procedure 1.
      - Details on “Air Pollution Method 1” (Project Level)
        Information on the section DIN DIN 16798- 1 Method 1 of the Ventilation module in LINEAR Building.
      - Details on “Air Pollution Proc. 1” (Room Level)
        Information on the Air Pollution Method 1 section of the Ventilation module in LINEAR Building.
    - About the Calculation Method “DIN EN 16798-1 Air Pollution, Procedure 2”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method DIN EN 16798-1 Air Pollution, Procedure 2.
    - About the Calculation Method “DIN 1946-4 Healthcare”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the DIN 1946-4 Healthcare calculation method.
    - About the Calculation Method “DIN 1946-7 Laboratories”
      Explains the concept of determining the required air volumes for rooms in non-residential buildings based on the calculation method DIN 1946-7 Laboratories.
    - About Air Volume Determination acc. to Isso 51 & 53
      Explains the concept of air volume calculation according to ISSO 51 & 53.
    - About the Approximate Determination of Required Air Volumes
      Explains the concept of approximately determining the required air volumes for rooms in non-residential buildings.
  - Details on the “Air Volumes” Section
    ation on the Air Volumes section of the Ventilation module in LINEAR Building.
  - Transfer Supply and Extract Air Volume Flow to a CAD Program
    Shows step-by-step how to transfer the supply and extract air volume flows determined in the Ventilation module to a connected CAD program in LINEAR Building.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to transfer radiators or chilled beams to a LINEAR Building connected CAD platform and insert symbols and components from the libraries into CAD.
Drawing Networks
Learn how to draw pipe and duct networks, connect components, generate schemes, and create slots and openings.
Calculating Networks
Learn how to calculate pipe and duct networks.
Automatic labeling and dimension
Learn how to label components and sections in your drawing and how to dimension your drawing.
Output
Get basic information on output to the LINEAR Solutions for AutoCAD. for output to LINEAR Building and print mask editor.

Details on “Air Pollution Proc. 1” (Room Level)

Information on the Air Pollution Method 1 section of the Ventilation module in LINEAR Building.

In this area, you define the room-specific settings for determining the required air volumes for rooms in non-residential buildings based on the calculation method DIN EN 16798-1 Air Pollution, Procedure 1.

You are here

Module Overview ➤ Ventilation ➤ Room Level (Building Structure) ➤ Air Pollution Proc. 1

“Air Pollution Method 1” section of the Ventilation module in LINEAR Building.

General Room Data

The room number, the room name and the room temperature are displayed, which you can adjust as required. The Exterior and Interior fields show the exterior or interior clear dimensions of the room. You can adjust the dimensions in the Room Data dialog.

: Opens the Room Data dialog in which you can adjust the parameters of the room.

General

Category: Drop-down list for selecting the category of expectations for the quality of the indoor climate in accordance with DIN EN 15251. The higher the expectations, the greater the volume flow rates required to ensure the desired indoor climate quality. If the category was taken from the global default settings at project level, it is given the addition From Project Settings:.

Building Emission: Drop-down list for selecting the pollutant load of the building according to DIN EN 16798-1. The higher the pollutant load in a building, the greater the volume flow rates required to reliably dissipate or dilute the loads. If the setting was adopted from the global default settings at project level, it is given the addition From Project Settings:.

Number of Persons

Defines the number of people in the room. Values originating from the CAD program and changed values are shown in bold.

: Click to set the number to zero unless another calculation method with guideline values for the number of persons is selected. If another calculation method with guide values is selected, the value of this method is used, as no guide values for the number of persons are calculated within the framework of method 1 of DIN 16798-1.

Person-related Specific Outdoor Air Volume Flow Rate

Defines the specific outdoor air volume flow rate per person.

: One click restores the standard default value.

Building-related Specific Outdoor Air Volume Flow Rate

Defines the building-related specific outdoor air volume flow rate per square meter.

: One click restores the standard default value.

Name	Purpose	Lifetime	Type	Provider
CookieConsent	Saves your consent to using cookies.	1 year	HTML	Website
fe_typo_user	Assigns your browser to a session on the server.	session	HTTP	Website

Name	Purpose	Lifetime	Type	Provider
_ga	Used to distinguish users.	2 years	HTML	Google
_gat	Used to throttle request rate.	1 day	HTML	Google
_gid	Used to distinguish users.	1 day	HTML	Google
_ga_QTGLMF6700	Google Analytics cookie to throttle the request rate.	2 years	HTML	Google
_gcl_au	Used by Google AdSense to experiment with advertisement efficiency.	3 months	HTML	Google
_clck	Persists the Clarity User ID and preferences, unique to that site, on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 years	HTML	Microsoft
_clsk	Connects multiple page views by a user into a single Clarity session recording.	366 day	HTML	Microsoft
_uetsid	This is a tracking cookie used by Microsoft Bing Ads. It allows us to target a user who has visited our website before.	1 day	HTML	Microsoft
_uetvid	Used to track visitors across multiple websites to present relevant advertising based on the visitor's preferences.	390 day	HTML	Microsoft
ln_or	Registers statistical data on users’ behaviour on the website. Used for internal anyalyzes by the website operator.	1 day	HTML	LinkedIn

LINEAIR VOOR AUTODESK REVIT

LINEAIR VOOR AUTODESK AUTOCAD

Details on “Air Pollution Proc. 1” (Room Level)

General Room Data

General