Details on the Symbol Bar in Connection with the Design of Heating and Cooling Convectors
Information on the symbol bar for heating and cooling convectors.
You are here
| Button | Description |
|---|---|
 Switches to the 3D/Floor Plan Mode | In connection with AutoCAD, this mode decides whether a 2D element or a cuboid with the set VDI detailing is drawn in when a radiator is drawn in. Drawn radiators are colored differently depending on the mode in order to visually detect which elements were placed in which mode in the connected CAD program. |
 Pipe Run View | Shows the selected element in the associated pipe run. |
 U-Value Exchange | Opens the Switch U-Value dialog, in which you can replace U-values within the respective current structural level and within the module. |
 Redimensioning | Opens a context menu in which you can assign loads to all rooms at the current structure level or reassign all existing loads at the structure level. |
 Links drawn radiators/cooling convectors storey by storey with the radiator/cooling convector layout | If LINEAR Building loses the connection to the elements in AutoCAD after drawing in radiators or cooling convectors, e.g. due to a crash, drawn elements can be linked again storey by storey using this function. |
 Insert New Radiator/Cooling Convector | Inserts a new radiator or cooling convector at room level. When dimensioning the new radiator/cooling convector, any existing radiators or cooling convectors are taken into account and re-dimensioned if necessary. |