Details on the “ Storey Table” Dialog
Information about the Storey table dialog.
In this dialog, you can edit storey data, create and remove storeys and import storey data.
You are here:
or
Tag: Specifies the name of the storeys.
Layer Code: Specifies the abbreviation for the layer designation if the variable <<E>> (for layer) has been created in the layer key. The number of characters in the layer code must not exceed the number of variables in the layer key.
Storey height, Floor construction: Specifies the dimensions for storey height and floor construction in mm.
Hollow Floor: Specifies whether the floor of the storey should be detected as a hollow floor.
Suspended ceiling, Ceiling thicknesses, Clear height: Specifies the dimensions for suspended ceiling, ceiling thickness and clear height in mm.
Height of GF above 0.0. (Ground): Specifies the distance between the ground floor and the zero point and thus the height of the first floor above ground level
Insert row, delete row: To create a new storey above an existing storey in the storey table, select the existing storey and press F5. To delete a storey, press F6.
Import storey data ...: Imports storey data from DWG or PRO files.