Details on Start Data
Information about the Start data dialog.
You are here:
Component dimension
Material: If an extensive list of material sets is available, it is recommended to select the required material set from the first drop-down list. Then select the required material from the set material set or all material sets in the drop-down list below.
Working pressure: Use the drop-down list to set the required working pressure.
Building type Pipes: In this list, only pipes included in the material set in the first two drop-down lists on the top are selectable.
Suppose you use your own material set with more than one type of pipe. If only one pipe type is displayed in this list, then the group label is missing from the pipe types.
Beginning with pipe end – activated: The end of the pipe is drawn first. This function is available for pipes with different ends, e.g. sewage pipes with sleeves.
Building type Bends/Elbows: Only the bends or angles that match the selected material set and pipe are available for selection.
Nominal diameter: Select a nominal width from this list.
Insulation
Material: Click on 
to open insulation tables. In it you can determine or delete other insulating materials. The insulating materials in this table are selectable in the list located to the left of the button.
Thickness: Clicking on 
opens a list where you can select the desired insulation thickness. You can overwrite the value displayed in the field to the right. You can enter the value for the thickness of the material or overwrite the value selected with the button.