Details on Gas Meter
Information about the dialog Gas meter.
You are here:
One-pipe meter, Two-pipe meter
Specifies whether the gas meter is a single-pipe or a two-pipe meter.
Nominal load in m³/h
Use the drop-down list to select nominal load for the gas meter.
: Opens the dialog Estimated gas meter dimensioning. In this dialog, you can roughly calculate the nominal load by specifying consumers for the gas network.
With increased thermal capacity, with manifold, with outlet shut-off valve
Select these additional options to create the gas meter, if necessary.
Drop-down list TSD/GEFV: Define if the meter should have a TSD or a GEFV or not.
Drop-down list file type: Determines whether the meter is a Corner type or a Straight way type.
Draw <: After clicking on Draw < you can place the gas meter in the drawing according to the default settings.