Details on Component (3D - Model planning)
Information about the command group Components in the planning type 3D - Model planning.
You are here:
LINEAR CAD Browser…
Starts the LINEAR CAD Browser, from which you can insert a variety of 3D components.
Draw central unit <
The button is only available in the Ventilation discipline and opens the Device configuration dialog, in which you can configure and then draw in central ventilation devices.
Tank generator ...
Opens the Tank configuration dialog where you can define and draw in a vessel.
Manifold generator ...
Opens the dialog manifold construction, where you can define and draw in a manifold.
Dwelling station ...
Opens the Dialog Assistant fresh water and dwelling stations, where you can design on manufacturer models and insert them into the project.
Valve generator ...
Opens the dialog Generating of a (...) in which you can create components such such as pumps.
Install valve <
Opens the Component selection dialog in which you can select valves from the available manufacturer catalogs in order to insert them into an existing pipe.
Plate heat exchanger ...
Opens the dialog Plate heat exchanger where you can define the structure of a plate heat exchanger and then draw it in.
User components
Opens the dialog Components where you can create and manage your own components.
Create component connector <
With the command Create component connector < you can set a connection to a self-created component in order to connect a 3D pipe to it later, for example. After that, you can define the connection in more detail using the Edit component connector < command and define the dimenson and a connector type.
Edit component connector <
After you have set a connection to your component using the Create component connector < command, you can use Edit component connector < to define the connection in more detail, specifying the dimension and connector type, for example.
Correct component connection ...
After starting the command and then selecting the component, the dialog Correct component connections opens, where you can adjust the connection types, their nominal widths and, if necessary, the pressure ratings of the component connections of the component.
Revit MEP Import...
Opens the file explorer where you can select a *. d3d file for a MEP import from Revit. Then, the workflow for the MEP import starts.