Jump directly to main navigation Jump directly to content

Details on Technical Data for Bends

Information about the component data dialog for bends in siphonic drainage pipe networks.

A bend has two connection points, to which a pipe is connected in each case. You can automatically draw Bends with the Fittings < command. Bends are available at different angles.

You are here:

AssistantsWaste water / Drawing typeCalculationComponentsTechnical dataComponent

Name

Shows the name of the component. You cannot modify the name.

Zeta value

The zeta value is used to calculate the pressure loss through the built-in part. When calculating drainage systems with siphonic flow, you can assign zeta values that deviate from the standard to bends. The dialog is not available for other drainage systems because there is no adjustable data.

Reset: Resets the zeta value to the default value.