Details on Pipe Run View
Information on the Pipe run view section.
You are here:
Applies to: Radiators, Cooling convectors, Panel heating, Panel cooling, Domestic ventilation.
Pipe run view
All heat/cooling generators or central units, pipe runs, manifolds, manifold connections, Tichelmann connections if applicable, radiators, cooling convectors, circuit zones of panel heating/cooling and their feed pipes, dummy covers as well as connection options for electrical appliances are shown. You can add new components or component groups and move them simply by dragging and dropping. The selection of parts and part groups you can add depends on the level of the button in the pipe run view. A right mouse click opens the context menu that allows you to cut, copy, paste and delete elements. The pipe run view is only available if one of the modules Radiators, Cooling convectors, Panel heating, Panel cooling or Domestic ventilation is activated.
Symbol | Description |
---|---|
Project | |
Heat/cooling generators | |
Add new component or component group | |
Pipe Run | |
One-pipe run | |
, | Manifold |
Manifold port | |
Tichelmann connector | |
Feed pipe | |
Heat-/Cooling circuit | |
Occupied zone | |
Control | |
Electric appliances | |
Central ventilation device | |
Supply air | |
Extract air | |
Dummy cover |
Pipe run view panel heating/cooling
In the panel heating/cooling modules, the hydraulic arrangement of the individual circuit zones is shown and, if applicable, the feed pipes of the circuits to the manifold connections or Tichelmann connections. For circuits with multiple circuit zones, you can also connect the zones in series or integrated in parallel.
Integrated series circuit | Integrated parallel circuit |
---|---|
Navigation
You can use the arrow keys to navigate through the structural levels. Use the up and down arrow keys to navigate between levels. Use the left and right arrow keys or the x and - keys on the numpad to collapse and open the levels.