Jump directly to main navigation Jump directly to content

Details about Import from Revit - Material

Information on the Import from Revit - Material dialog in connection with the Revit MEP import.

In this dialog you define the pipe and duct sets to be used for the Revit MEP import. To generate the networks exported from Revit to the d3d format and subsequently imported into AutoCAD, you must specify which pipe or duct sets are to be used for generating the networks. You can choose between different manufacturer-neutral sets and manufacturer sets. All manufacturer sets are available, whose data sets have been installed and, if necessary, have licensed.

To generate the networks exported from Revit to the d3d format and subsequently imported into AutoCAD, you must specify which pipe or duct sets are to be used for generating the networks.

You are here:

Assistants3D Piping/3D Air ductPipes/Air duct constructionRevit MEP Import ...

Table 1. Table of material to import
Column Description
Revit material Displays the material exported from Revit.
Manufacturer Specifies the manufacturer of the pipe or duct set to be used.
Set Specifies the pipe or duct set to be used.
Working pressure Specifies the operating pressure for pipe sets so that the correct design can be determined when modeling flanges.