Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Re-laying Circuits

Shows step-by-step how to adapt the pipe laying to changed construction areas.

Before you begin

You want to adapt the pipe routing to changed construction areas.

Requirement:

The construction area has been changed and no longer corresponds to the pipe laying.

Navigate to:

Project tabPanel heating/cooling disciplineConstruction tab

Construction tab panel heating/cooling Linear Revit

Initial situation:

Construction area meander Linear Revit

Procedure

  1. Open the Edit circuits section.

    Edit circuits Linear Revit

  2. Click Re-lay selection <.
    Tip:

    If you want to re-lay all panel heating circuits or panel cooling circuits contained in the project, use the Re-lay all function.

  3. Select the panel heating circuits or panel cooling circuits to be re-laid and confirm with Enter.

Results

The pipe laying is adapted to the changed construction area.

Construction area meander Linear Revit