Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Editing Partial Sections

Shows step-by-step how to set calculation-relevant data for individual section parts.

Before you begin

You have calculated a pipe network and want to adjust or supplement the data of selected section parts.

Requirement:

The pipe network has been designed and calculated.

Note:

Values entered locally have priority over settings and boundary conditions.

Navigate to:

Project tabDisciplines …DisciplineAnalyse tabCalculation …

Applies to: Heating and Cooling.

Procedure

  1. In the section Section parts, select the desired section part.
  2. Click on Edit....

    The Edit section part dialog opens.

  3. Enter individual values in the Length and Height difference fields that deviate from the entered dimensions, for example to compensate for design tolerances.
  4. If necessary, enter additional bends, pressure loss and a deviating ambient temperature.
  5. If required, adjust the local maximum values for R-value, Velocity and Simultaneity. Confirm the changes by clicking OK.

Results

The adjusted data has been assigned to the selected section part and is used in the calculation.