Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on Component Data for Pipes

Information about the component data dialog for pipes.

The program detects the line type by the system type of the pipe. Usually, you set the system type before creating the pipe. The system type can also be changed subsequently by using the Change system type function on the Construction tab. A pipe may be connected at each end to a maximum of three other pipes (crossing T-piece) or to one family, which symbolizes another component. It is neither possible to connect several pipes to a component connection nor to leave pipe ends open. The pipe type is determined either from the default that you set in the Pipe tables or by the separate definition of the pipe.

You are here:

Project tabDisciplineAnalyse tabComponentsTechnical data ...Component

Technical data pipes Linear Revit

Name

Shows the name of the component. You cannot modify the name.

Calculation

Length: Here, the drawn length is displayed. You can change the value manually and have it reset to the drawn length by clicking Reset.

Roughness: The specified Roughness is the value taken from the relevant pipe table.