Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on Section Part

Information about the Section part dialog in pipe network calculation gas.

You are here:

Project tabDiscipline gasAnalyse tabCalculationSection partsEdit ...

Dialog section part gas Linear Revit

Length

The value is taken from the model and can be changed.

Reset

Resets the length to the constructed value in the model. The button is activated when the length has been changed.

Additional fittings: Quantity 90° bends, Quantity 45° bends

Enter the amount of additional bends that are to be given out as additional material in the material list. If 0 is entered, only the fittings constructed in the model are detected.