Knowledge Base Revit
Analyzing Buildings
Get information about the requirements analysis of a building. The demand analysis includes the calculation of the heat load, the cooling load and the ventilation concept.
Heat Load
Select a calculation basis for the calculation of the heat load according to the location and requirements of your project.
Heat load calculation according to ISSO 51 and 53 (2018)
Explains the concept of heat load calculation according to the Dutch standards ISSO 51 and ISSO 53 (2018).
About General Heat Load Data
Explains the concept of general heat load data in the context of heat load calculations.
Details on Heat Generator Installation Type
Information about the Heat generator installation type section in the general heat load data.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function, and interaction of the LINEAR Solutions programs in Revit and LINEAR Building.
Preparing Building
Learn how architects prepare plans and models to create a building model for building analysis.
Pre-conception design
Learn how to plan the positionining and dimensioning of technical control centers and create the route concept in collaboration with all parties involved in the planning.
Analyzing Buildings
Get information about the requirements analysis of a building. The demand analysis includes the calculation of the heat load, the cooling load and the ventilation concept.
- Heat Load
  Select a calculation basis for the calculation of the heat load according to the location and requirements of your project.
  - Heat Load Calculation Based on EN 12831-1 (2017)
    Explains the concept of heat load calculation based on EN 12831-1 (2017).
  - Heat Load Calculation Based on EN 12831 (2003)
    Explains the concept of heat load calculation based on EN 12831 (2003).
  - Heat load calculation according to ISSO 51 and 53 (2018)
    Explains the concept of heat load calculation according to the Dutch standards ISSO 51 and ISSO 53 (2018).
    - About Building Detection
      Explains the building detection concept in relation to the heat load calculation.
    - About General Heat Load Data
      Explains the concept of general heat load data in the context of heat load calculations.
      - Select Calculation Base
        Shows step-by-step how to select a calculation base for your heat load.
      - Details on Climate data for the Netherlands
        Information on the Climate data for the Netherlands section of the general heat load data.
      - Details on Building Mass
        Information about the Building mass section in the general heat load data.
      - Setting the Thermal Bridge Supplement Globally
        Shows step-by-step how to set a thermal bridge supplement for your entire project.
      - Details on Thermal Bridge Supplement
        Information about the Thermal bridge supplement section in the general heat load data.
      - Setting the Thermal Bridge Supplement Individually
        Shows step-by-step how to set the thermal bridge supplement at the component in the room.
      - Editing Table for Thermal Bridge Supplements
        Shows step-by-step how to edit the thermal bridge supplements table.
      - Setting Minimum Temperature of the Building Unit
        Shows step-by-step how to set the minimum temperature for the unheated condition in a building unit.
      - Configuring the Heat Transfer System Globally and at Room Level
        Shows step-by-step how to set up a heat transfer system , both project wide and room specific.
      - Details on Heat Generator Installation Type
        Information about the Heat generator installation type section in the general heat load data.
      - Details on Heat Transfer System
        Information about the Heat transfer system section in the general heat load data.
      - Details on Safety Class ISSO 51
        Information about the ISSO 51 section in the general heat load data.
      - Set Ventilation System Globally
        Shows step-by-step how to set up a ventilation system for your entire project.
      - Set Ventilation System in Ventilation Zone
        Shows step-by-step how to define the ventilation system at the ventilation zone level.
      - Details on Ventilation
        Information about the Ventilation section in the general heat load data.
      - Details on Ventilation -> Infiltration
        Information on the Ventilation -> Infiltration section of the general heat load data.
    - About Component Values
      Explains the concept of component values.
    - About the Transmission
      Explains the concept of transmission at room level in relation to the heat load calculation.
    - About Ventilation Data
      Explains the concept Ventilation data in relation to the heat load calculation.
    - About the Intermittent Heating Operation
      Explains the concept of intermittent heating operation at room level in connection with the heat load calculation.
  - Heat Load Calculation According to SN SIA 384/2 (2020)
    Explains the concept of heat load calculation based on SN SIA 384/2 (2020).
  - Heat load calculation according to DS 418(2020)
    Explains the concept of heat load calculation according to the danish standard DS 418.
  - Heat load calculation according to SP 60.13330.2016
    Explains the concept of heat load calculation based on SP 60.13330.2016.
  - Approximate Heat Load
    Explains the concept of approximate heat load calculation by means of quick entry.
- Cooling Load Short Procedure
  Learn how to calculate a cooling load for your building based on the short procedure of VDI 2078 (1996), section 6.
- Cooling Load Dynamic
  Select a method for determining the cooling load to suit the location and requirements of your project.
- Domestic Ventilation According to DIN 1946-6
  Explains the concept of the modules for domestic ventilation according to DIN 1946-6.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Inserting Components
Learn how to insert components from the LINEAR CAD Browser, from the libraries and configurators of the Library tab or from LINEAR Building into a model.
Constructing Networks
Learn how to create pipe and duct networks, design slots and openings and manage discipline-related reports and tasks.
Calculating Networks
Learn how to calculate pipe and duct networks.
Creating a Scheme
Get information on the workflow Scheme for the discipline Potable Water in Revit.
Construction Design
Get information about the workflow Construction design in connection with pipe and duct networks.
Labeling
Learn how to label section parts and components in the model.
Output
Obtain information on the output of calculation results and material extracts in your CAD program in LINEAR Building. In addition, find out how you can customize the layout of the output documents using the print mask editor.
Troubleshooting
Get information about possible sources of errors when working with LINEAR Solutions.

Details on Heat Generator Installation Type

Information about the Heat generator installation type section in the general heat load data.

You are here:

Module overview ➤ Heat load ➤ Project level ➤ General heat load data

Section heat generator installation type Linear Revit

Centralized (collective)

Enabled: Collective installation - there is a central heat generator for all building units in the building. Transmission heat losses to other building units in the total heat load are not considered.

Decentralized (individual)

Enabled: Individual installation - each building unit in this building has its own heat generator. Transmission heat losses to other building units in the total heat load are considered.

Name	Zweck	Ablauf	Typ	Anbieter
CookieConsent	Speichert Ihre Einwilligung zur Verwendung von Cookies.	1 Jahr	HTML	Website
fe_typo_user	Ordnet Ihren Browser einer Session auf dem Server zu. Dies beeinflusst nur die Inhalte, die Sie sehen und wird von uns nicht ausgewertet oder weiterverarbeitet.	Session	HTTP	Website

Name	Zweck	Ablauf	Typ	Anbieter
_ga	Wird verwendet, um Benutzer zu unterscheiden.	2 Jahre	HTML	Google
_gat	Wird zum Drosseln der Anfragerate verwendet.	1 Tag	HTML	Google
_gid	Wird verwendet, um Benutzer zu unterscheiden.	1 Tag	HTML	Google
_ga_QTGLMF6700	Google Analytics Cookie der dazu dient die Anfragerate zu reduzieren.	2 Jahre	HTML	Google
_gcl_au	Wird von Google AdSense zum Experimentieren mit Werbungseffizienz auf Webseiten verwendet.	3 Monate	HTML	Google
_clck	Speichert die Clarity-Benutzer-ID und die Einstellungen, die nur für diese Website gelten, im Browser. Dadurch wird sichergestellt, dass das Verhalten bei späteren Besuchen derselben Website der gleichen Benutzerkennung zugeordnet wird.	1 Jahre	HTML	Microsoft
_clsk	Verbindet mehrere Seitenaufrufe eines Benutzers zu einer einzigen Clarity-Sitzungsaufzeichnung.	366 Tag	HTML	Microsoft
_uetsid	Dies ist ein von Microsoft Bing Ads verwendetes Tracking Cookie. Es ermöglicht uns, auf einen Nutzer einzugehen, der bereits im Vorfeld unsere Webseite besucht hat.	1 Tag	HTML	Microsoft
_uetvid	Wird verwendet, um Besucher auf mehreren Webseiten zu verfolgen, um relevante Werbung basierend auf den Präferenzen des Besuchers zu präsentieren.	390 Tag	HTML	Microsoft
ln_or	Registriert statistische Daten über das Verhalten der Nutzer auf der Website. Wird vom Betreiber der Website für interne Analysen verwendet.	1 Tag	HTML	LinkedIn

LINEAR FÜR AUTODESK REVIT

LINEAR FÜR AUTODESK AUTOCAD

Details on Heat Generator Installation Type

Centralized (collective)

Decentralized (individual)