Details of area percentages of laying panels for modular panels
Information on the Percentages of area of panels dialog for systems with modular panels.
Defines the area percentages of the individual elements of systems with modular panels. Depending on the manufacturer and system, the dialog can contain different specifications and filter options.
You are here:
By specifying the desired laying pattern, the laying distance as well as the dimensions, the laying panels displayed under Module/Panel/Element can be filtered.
Drawing of laying panels with a double-meander laying pattern is currently only available in connection with ACAD.
Apply Module(s) >>: Applies the number of selected modules to the preliminary compilation in the right window.
<< Remove Module: Removes individual marked modules from the preliminary compilation.
In the lower area, you can check the optimum occupancy via Total laying area, Already occupied area and Remaining laying area. Different module sizes can be combined with each other in such a way that the given laying area is optimally used.
Connect partial areas individually
Enabled: All partial areas are connected individually.
Connect partial areas in series
Enabled: The max. number of areas drop-down list is enabled and you can select the maximum number of areas per row. If you do not make a selection here, the selected partial areas will be filled up row by row. If the last row becomes much smaller than the previous ones, the areas will be redistributed accordingly.
Circuit connection directly to the manifold
Enabled: Each individual circuit is connected directly to the manifold.
Tichelmann connector
Enabled: The individual circuits are hydraulically linked via a Tichelmann circuit before being connected to the manifold. In addition, the drop-down list max. number of rows is enabled, where you can specify the maximum number of circuits per Tichelmann connection. If you do not make a selection here, one Tichelmann connection is created per row.