Details on Settings Potable Water
Information about the Settings dialog in the pipe network calculation potable water.
You are here:
The dialog is divided into following parts:
System types
In this section, specify global settings for the detection of components and pipes that are to be considered during calculation.
Component detection
Here you define whether the entire network or only parts of the same are to be included in the calculation. Furthermore, you can decide whether the modeled dimensions should be adopted as fixed dimensions in the calculation or whether the correct dimensions should be calculated directly.
Calculation parameters
In this section, global settings for calculation and dimensioning, calculation method, limit values and temperatures can be made.
Maximum velocities
In this section, specify the maximum velocities as limit values for the calculation.
Calculation presettings
In this section you make global settings for the analysis of calculation results.
Units
Units...: Opens a drop-down menu where you can select a predefined unit scheme or open another dialog to make user defined settings.