Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on 3D Electric Cable Trays

Information about the 3D Electr. Cable Trays section in the Electr.cable tray constr. of the 3D Air Duct Construction.

You are here:

AssistantsElectrical / 3D Electric Cable TraysElectr.cable tray constr.3D Electric

Draw

Symbol

Description

Draw cable duct

After clicking this button you can draw a cable duct.

Connecting

Connect two open duct ends with the Connect command.

Edit

Button for editing the drawn Electr. cable trays., e.g. Set angle, Rotate component.

Symbol

Description

Set angle

After clicking this button you can set an angle.

Shift component

After clicking this button you can shift a component.

Align component

Use the command to connect duct pieces by a combination of turning and shifting.

Insert branch into existing duct

Use this button to insert a branch into an duct.

Insert double branch into existing duct

Use this button to insert a double branch into an duct.

Delete component

Use this button to delete an existing component.

Edit component

Use this button to edit a component.

Details

Detail work on the drawn duct network, e.g. draw a Cover on connector, Put socket onto duct or pipe. For more information, see Details.

Symbol

Description

Cover on connector

Click this button to draw a cover on connections.

Fitting length / loose flange at connector

Using this button you can draw in fitting lengths or loss flanges on connections.

Put socket onto duct or pipe

Use this button to draw a socket onto a duct or pipe.

Create cutout in duct

Use this button to create a cutout in a duct.

Move cutout

Use this button to edit a cutout in a duct.

Delete cutout from duct

Use this button to delete a cutout from a duct.

Modify section length

Use this button to edit the section lengths of a duct.

Divide into section lengths

Use this button to split the duct into sections with a corresponding section length.

Join section lengths

Use this button to join section lengths.