Details on Maximum Velocities in the Settings Potable Water
Information about the section Maximum velocities in the Settings dialog in the Potable Water trade.
In this section, specify the maximum velocities as limit values for the calculation. The settings are saved with the project. Exceptions are noted accordingly.
You are here:
The maximum velocities are determined by the calculation basis. Maximum velocities are intended for the flow rates for the different sections of the potable water network. You can edit the values for your project.
House service connection pipe
Pipes from the drilling connection through to the main shut-off device (MSV).
Consumption pipes (Zeta < 2.5)
All remaining pipes in which a Zeta value is less than 2.5. Fittings will not be considered.
Consumption pipes
All remaining pipes in which a Zeta value is greater than or equal to 2.5. Fittings will not be considered.
Continuous supply pipelines
All pipes that serve a continuous consumer.
Flexible pipes
All pipes that have the material Flexible pipes from the pipe tables assigned to them.
Reset
Resets all flow velocities to the DIN values originally proposed by the program.
Velocity limits
When selecting the Russian potable water standard SP 30.13330.2020, you can additionally select the velocity limits based on sound levels according to the standard as a default for the pipe network calculation. Select the Velocity limits option to do this. By clicking the button, you open the dialog Velocity limits according to SP 30.13330.2020, where you will find an overview of the standard values.