Details on Component Data for Non-return Damper
Information about the component data dialog for Non-return damper.
You are here:
Name
Specifies the name of the component. You can modify the name. Clicking 
restores the default setting.
Select valve...
Opens the Select valve series dialog where you can assign manufacturer-specific valves and VDI valves to the component. The range of valves depends on the installed manufacturer datasets.
Reset
Resets a manually assigned valve or a valve from the Valve preselection to a neutral model.
Nominal diameter
Shows the current nominal diameter of the valve of the system. You can select and set other dimensions from the drop-down list depending on the model. The determined nominal diameter is then used in the calculation. Select free in the drop-down list, a nominal diameter is assigned based on the calculation results. The new assigned nominal diameter will be displayed the next time the dialog is opened.
fixed
Activated: The nominal diameter of the valve is not adjusted in the calculation.
Deactivated: The nominal diameter of the valve is adjusted during the calculation.
Technical data
The table lists the technical data of the selected non-return damper.