Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on Technical Data for the Main Shut-off Valve

Information about the component data dialog for the main shut-off valve.

The main shut-off valve represents the starting component for the pipe network calculation.

You are here:

AssistantsGas / Drawing typeCalculationComponentsTechnical data <Component selection

Name

Specifies the name of the component. You can modify the name. Clicking restores the default setting.

Calculation

Inlet pressure: Set the available pressure for the entire gas pipe network at the main shut-off valve.

System name: If there are several systems within a drawing it makes sense to name each MSV in the field in order to easier identify them in the calculation dialog and in the printouts.

Nominal diameter: The nominal diameter results either from the calculated dimension of the section part (entry = Section part) or it can be preset (e.g. DN20).

Connections

The connection type can be selected from the drop-down list or is set by the program in the Standard entry.