Details on Reports
Information about the Reports dialog in Pipe and Duct Network Calculations.
You are here:
Applies to: Heating and Cooling.
Display systems
Activated: If there are several systems in the project, only the reports of system selected in the calculation dialog are displayed.
Deactivated: The reports of all systems in the project are displayed sorted by report type.
Overview
The reports are organized according to errors, warnings and notes. If an error message exists, this is indicated by a red coloring of the report button in the calculation dialog. If there are only notes regarding the calculation the button be colored orange. If no notes or errors exist, the button is uncolored.
When clicking a report, the detailed report description is displayed in the section below and you can . use the Show command.
Detailed report description
Shows detailed information on the selected report. If possible, a suggestion how for handling the error is shown. If the error is caused by a particular component, the component number and, if applicable, the section part or flow path number are displayed.
If the localization of the error source via Show is not sufficient, you can find the component, the section part or the flow path using the Search command from the calculation dialog. After entering the component, section part or flow path number in the text field next to the button, click Search.
Show in...
Drawing: Displays the position in the drawing to which the report refers. This can be a section part or a component. Pressing Esc brings you back to the Reports dialog.
Calculation dialog: Only active if a calculation has been performed and the marked report concerns a component. Returns to the calculation dialog and selects the corresponding component.
Text file Creates a text file with the detailed report descriptions which you can save and edit.
Close
Closes the Edit report list dialog and brings you back to the calculation dialog.