Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on Section Part

Information about the Section part dialog in the Gas Pipe Network Calculation.

You are here:

AssistantsGas / Drawing typeCalculationCalculationEdit .... (Section parts)

Length

The value is taken from the drawing and can be changed.

Reset

Resets the length to the constructed value in the drawing. The button is activated when the length has been changed.

Additional fittings: Quantity 90° bends, Quantity 45° bends

Enter the amount of additional bends that are to be given out as additional material in the material list. If 0 is entered, only the fittings constructed in the drawing are detected.